3 IO PLUS

The 3 I/O PLUS Modules are fully monitored loop powered devices which permit the interfacing of third-party equipment with the fire alarm control panel using normally open dry contact connections. Each module can be fitted with a maximum of three inputs and three outputs.

The connection to each input is monitored for fault (open or short circuit) and alarm conditions.

The interface is used to monitor the contacts of an external system which must be interfaced to the fire alarm system, for example a flow switch in a sprinkler system to indicate if the sprinklers have been activated or extinguishant level monitoring in gas extinguishing systems, etc.

TECHNICAL SPECIFICATIONS

SUPPLY VOLTAGELoop Powered 20V to 30V DC
LOOP CURRENT – QUIESCENT1.4 mA (1 ch.) – 1.5 mA (2 ch.) – 1.6 mA (3 ch.)
LOOP CURRENT – ALARM / SHORT-CIRCUITIQ+ 1.2 mA for each I/P in alarm / IQ+ 1.4 mA max.
LOOP CURRENT – OPEN CIRCUITIQ+ 1.0 mA max.
LOOP CURRENT – OUTPUT ACTIVEIQ+ 1.1 mA for each O/P activated
OUTPUT RELAY CONTACT RATING2A 30V DC / 0.5A 125V AC
CABLE SIZE0.5-2.5 mm²
OPERATING TEMPERATURE-10ºC to +50ºC
HUMIDITY / PROTECTIONMax. 95% no condensation
DIMENSIONS150 (W) x 90 (L) x 32 (H) mm
WEIGHT216 g inc. packaging

DOWNLOADS

This content has been restricted to logged in users only. Please login to view this content.
This content has been restricted to logged in users only. Please login to view this content.
This content has been restricted to logged in users only. Please login to view this content.
This content has been restricted to logged in users only. Please login to view this content.