BCM 3 I/O

This unit is a fully EN-54 Part 4 compliant battery charger which also incorporates, in some models, a loop interface that can be used with all of GFE’s addressable panels. It will monitor all fault conditions including charger fault, charger voltage level, input voltage supply fault and supply removal.

It can be supplied as a standalone module or boxed in an ABS plastic enclosure, including a 28V DC @ 1.7 or 2.4 Amp PSU. The standalone unit has 10A current rating and is supplied complete with heat dissipation.

TECHNICAL SPECIFICATION

SUPPLY INPUT 230 +10% -15% V AC – Monitored
SUPPLY OUTPUT 1.7 A OR 2.4 A @ 28V DC nominal
BATTERY CHARGER – CURRENT O/P 1 A max.
BATTERY TYPE / FUSE Max. 2 x 12 V 7 AH – Lead Acid VRLA / 3 A
I/O UNIT – LOOP CURRENT 1.7 mA Quiescent – 2.4 mA Fault
FAULT RELAY Changeover – 30V DC 1 A Resistive
I/O CONTROLLED RELAY Changeover – 240 V AC 10 A Resistive
OPERATING TEMPERATURE -10ºC to +50ºC
HUMIDITY / PROTECTION Max. 95% no condensation / IP21
DIMENSIONS 273 (L) x 107 (W) x 404 (H) mm
WEIGHT 1.7 Kg – 7 Kg inc. 2 x 7 AH Bat.

DOWNLOADS